 INVERTER LS100A MODE |
|
| Innovatory unique outstanding and perfect | |
 |
Space vector design: |
| Space vector voltage modulation | |
|
Silent design: |
| IGBT module, high carrier frequency | |
|
Smooth current: |
| Similariry Sin wave, to ensure motor smoothly rotation, safety and no | |
| vibration | |
|
Safety design: |
| Reduce noise, restrain emission | |
|
Multiple selection: |
| Available to drive motor with different four power capacity | |
|
Low price level: |
| Low price level to be competitire | |
| Standard Specifications | |
|
Voltage
|
200V
Single Phase
|
|||||
|
Model
|
LS100A-204K |
|||||
|
Output |
MAX Motor(KW) |
60W
|
100W
|
150W
|
150W
|
|
|
Rated Output AMP. |
0.42 |
0.7 |
0.9
|
1.2 |
||
|
MAX. Output Voltage |
200V ~ 240V Three phase matched voltage | |||||
| Highest Output Frequency | Up to 120Hz by Analog setting | |||||
| Power Source | Rated Voltage & Frequency | Single Phase 200/208/220 50Hz 200/208/220/240V 60Hz | ||||
| Allow Voltage Variance |  10% |
|||||
|
Control
System
|
Control Principle | SV PWM sine wave, voltage space vector control | ||||
| Range of Frequency Control | 1 ~ 120Hz | |||||
| Frequency Precision | Analog
Command: 0.1% (25oC
10oC) |
|||||
| Motor capacity | Adjust Dip-Switch to be capable drive multiple motor capacity including of 60W, 100W, 150W, 200W | |||||
|
Frequency Resolution |
Analog, 0.1Hz |
|||||
|
Output FRE. Resolution |
0.1Hz |
|||||
|
Overload Capability |
Rated Output AMP.150%, 60sec. |
|||||
| Speed Reference | DC 0 ~ 5V | |||||
|
Acc/Dec Ramp |
0.1 ~ 120sec |
|||||
|
Torque of Braking |
About 20% |
|||||
|
Protection Function |
V/F Curve |
Torque compensation by any V/F curve setting |
||||
|
Instantaneous Over Current |
Trop on upon 200% rated current |
|||||
|
Overload Capacity |
150% rated current in 60 sec. |
|||||
|
Over-Voltage or Low-Voltage |
DC Bus voltage higher than 400V or lower than 200V will have the drive trip |
|||||
|
Instantaneous Power Loss |
Trip with in 15m/sec |
|||||
|
Charging Indication |
DC Bus voltage higner than 50V the charging lamp is on light |
|||||
|
Rotation
System
|
Input |
Rotation |
FWD & REV rotation or individual command |
|||
|
Reset |
Reset automatically or by terminal |
|||||
|
Multi-Function Input |
Second speed control via terminal point |
|||||
|
Output |
Analog Voltage |
Analog Voltage Output DC 0 ~ 5V (internal) |
||||
|
Display |
Status LED Display |
Abnormal function display for Run/Stop yellow: power on . Red: fault motion Green: starting run |
||||
|
Environment |
Location |
In door, no corrosive gas or liquid and free from dust |
||||
|
Ambient Temp. |
10oC ~ 40oC |
|||||
|
Storage Temp. |
-15oC ~ 40oC avoiding high temperature to damage capacitor |
|||||
|
Humidity |
Below 90% RH, non-condensing |
|||||
|
Vibration |
Below 0.5G |
|||||
